Ground-mounted solar is our core work. This is the rest of what we engineer.
S R Energies is a renewable energy EPC contractor. Solar is what we build most and what we will always quote fastest - ground-mounted plants first, rooftop systems alongside them. The technologies below are ones we are equipped to engineer and execute, bringing in specialist partners where a project demands it.
How to read this page. These are capabilities, not a project list. S R Energies is a new firm and we are not going to dress up intent as track record. Where a technology needs a specialist partner or a licensed contractor, we will say so before you commit to anything - and if a project is outside what we can deliver well, we will tell you that too.
Solar photovoltaic
Design, supply, erection and commissioning of grid-tied solar power plants - on land and on roofs - along with the DISCOM and subsidy work that surrounds them.
Ground-mounted plants
Plants built on your own land - array layout, tilt and row spacing, foundation design for the soil and wind loading, site levelling and access, cable trenching and evacuation to your existing connection. Capacity set by your load and the connection, not by a roof.
Commercial & industrial rooftop
Plants on factory sheds, warehouses, hospitals, schools and hotels, sized to your load profile and roof, under CAPEX or OPEX structures.
Residential rooftop
1 kW upward for bungalows, flats and housing societies. Elevated hot-dip GI structure, PM Surya Ghar subsidy processing and Torrent Power net metering handled end to end.
Hybrid & off-grid
Solar with battery backup for sites that need power through outages, and off-grid systems where a reliable grid connection is not available.
Solar water pumping
Pumping systems for agricultural and estate use, including sizing against head, discharge and daily water requirement.
Operation & maintenance
Preventive maintenance, module cleaning schedules, string-level fault finding and performance monitoring - including on plants we did not build.
What else we take on
Battery energy storage (BESS)
Storage sized for a defined job rather than for its own sake - backup through outages, peak shaving to reduce demand charges, or shifting solar generation into time-of-day tariff windows.
Typical scope: load and tariff analysis, capacity and C-rate sizing, converter selection, safety and ventilation design, installation and commissioning.
EV charging infrastructure
AC and DC charging points for housing societies, commercial premises, fleet depots and hotels, including the incoming supply and metering arrangement that most site owners underestimate.
Typical scope: load assessment, OCPP-compliant hardware selection, cabling and protection, civil work, installation, commissioning and handover.
Wind & wind-solar hybrid
Gujarat has some of the best wind resource in the country. We take on small wind and wind-solar hybrid work, and provide feasibility and execution support on larger schemes alongside specialist partners.
Typical scope: resource and site assessment, hybrid sizing against load, evacuation planning, and execution coordination.
Compressed biogas (CBG)
Project development support for agricultural residue, press mud, cattle dung and municipal organic waste - the feedstock-to-gas questions that decide whether a CBG project is viable before any capital is committed.
Typical scope: feedstock assessment, technology and capacity selection, DPR support, approvals coordination and execution management with specialist partners.
How we specify equipment
The cheapest quotation on your table is usually cheapest because of what it leaves out. These are the standards we hold to.
| Modules | MNRE / ALMM-approved N-type TOPCon modules from established makes |
| Inverters | ISI standard, MNRE-approved grid-tied inverters with online monitoring |
| Structure | Hot-dip galvanised at 60-80 micron, designed for local wind loading |
| Foundations | Pile, pedestal or ballast, selected for the soil conditions at the site |
| Cabling | Branded solar-rated DC and AC cable, sized for voltage drop rather than minimum cost |
| Switchgear | IP-65 rated ACDB and DCDB with branded protection devices |
| Earthing & protection | Full earthing kit with copper-coated spike rods and ESE-type lightning arrester |
Every quotation we issue carries an itemised bill of material naming the makes offered, so you can compare like with like against any other quotation on your table. We would rather lose a job on price than win it by quietly downgrading a component.
Have a project in mind?
Tell us what you are trying to achieve and what the site looks like. We will tell you honestly whether it is something we should be quoting for.